Stain Additive to Reduce UV Damage to Wood

UV Boost is a concentrated water-based liquid stain additive that contains a new technology ultraviolet light inhibitor. Some regions of the country such as the Southeast, Southwest and higher altitude areas are subject to high intensity sunlight. Over time the ultraviolet light in sunlight darkens the lignin component of wood. When added to the first coat of any of our Lifeline water-based stains, UV Boost combines with the lignin to delay the wood beneath the stain from graying. Since the concentration of the active components differ, be sure to use the appropriate size for the amount of stain or finish you are using.

Features and Statistics

• Contains a new technology ultraviolet light inhibitor
• Non-toxic
• Water-based
• Low Odor
• Included in Lifeline Ultra-2 wood finishes
• Material Safety Data Sheet
• UV Boost Label
• Wood Finishes Application Guide

Shelf Life	1 year
Application Temperature	5o to 30o
Special Instructions	Shake container of UV Boost Add to first coat of Lifeline Exterior or Interior wood finishes on bare wood Shake or stir the container of stain or finish until the contents are thoroughly mixed Apply stain or finish according to the labeled directions Any stain containing UV Boost that is left over once the initial coat is applied may be used for subsequent coats. Just be sure to “box” the remaining stain to assure a uniform color

Made in U.S.A.