Clear Sealer/Primer

Prelude is a sealer/primer for wood surfaces that have been media blasted. Over the past few years media blasting has become an excellent tool for removing old finishes in preparation for applying a new coat of stain. However, media blasting significantly increases the porosity of the wood, thus allowing it to absorb much more stain than those wood surfaces that have been chemically stripped, sanded, or pressure washed. This high absorption results in a darker final stain color than that typically reflected by a color chart. In addition, wood that is not uniform as a result of media blasting often emphasizes the differences in wood grain absorption, even on a single log. This can result in streaks and blotches due to varying amount of stain absorbed by different areas of the wood. Prelude solves many of the potential problems created by media blasting. One coat fills the pores of the wood and provides a uniform surface film in preparation for the application of a pigmented stain. However it should be noted that Prelude is a sealer/primer and is not suitable as a final finish! For use exclusively with Lifeline wood finishes.

Features and Statistics

Shelf Life
  • 6 months
Application Temperature
  • 5o to 30o
Application Methods
  • Airless Sprayer
  • Brush
  • Back-brushing required
Surface Preparation
  • Clean and Dry
  • Free of mold and mildew
  • Never use steel wool
Frequency
  • Once as needed
Drying Time
  • Dry to the touch in 1 hour
  • Cures within 3 days
Ostukorv
Kerige üles